Urbo Hinged Shower Door
SERIES SW0142
Urbo Hinged Shower Door
- FRAMED: Framed look featuring rust-free metal framing around the glass.
- HINGED DOOR: A swinging door that utilizes high-quality hinges.
- CUSTOM: Is custom made to fit your shower field conditions, configurations and design requirements.
- WARRANTY: All Seawin products are covered under the Limited Lifetime Warranty.
- EASY TO INSTALL: This door is designed to be easily installed without the help of a professional installer.
- REVERSIBLE: Can be installed for either left or right-handed use.
- DURABLE and HIGH QUALITY: Premium thick glass matched with the strongest hardware.
- SAFETY: All Seawin’s glass is certified ANSI Z97.1 Tempered Glass. Our glass is significantly stronger than non-tempered glass.
Urbo Hinged Framed Shower Door
The Urbo hinged and framed shower door by Seawin stuns with an elegant design and detailed touch. The sophisticated stainless-steel hardware is a perfect mix of exceptional quality and unique urban style. This door is custom designed, available in 3/8-inch (10 mm) and 1/2 inch (12 mm) ANSI certified tempered safety glass.
Product Features
- Urbo series shower doors custom made to fit your opening.
- HARDWARE FINISHES AVAILABLE: HARDWARE FINISH: Polished Stainless, Brushed Stainless, Matte Black, Satin Gold.
- HINGED DOOR: A swinging door that utilizes high-quality hinges.
- GLASS: Premium quality 1/2 in. (12 mm) and 3/8 in. (10 mm) thick tempered glass.
- SmartPlumb™: An additional 3/8 in. adjustment can be made to accommodate for out-of-plumb/uneven walls.
- SmartWidth™ Adjustment: Wall profiles allow for up to 3/8 in. width adjustment.
- SmartClose™: Self-centering hinges offers a smooth door closure and limits water leakage.
- HydroLock™: Tight seals around all edges and creases of the door divert water back into the shower to prevent leakage.
- QUALITY FINISHES: Seawin’s premium hardware finishing process prevents corrosion, rust, chipping and scratching. Providing extended protection for your door.
- MagnaSeal™: Magnetic strips run along the door panels that hold the door tightly in place when closed and prevent water leakage.
- REVERSIBLE INSTALLATION: This door can be installed for left or right-handed opening.
- FRAMED: Framed look featuring metal rust free framing around the glass.
- MULLIONS: Horizontal and vertical optional mullions are available for this model. The mullions may be printed on one or both glass side surfaces.
- PRODUCT WARRANTY: This product is protected under Seawin’s Limited Lifetime Warranty.
- GLASS CERTIFICATIONS: Seawin only uses ANSI Z97.1 and 16 CFR 1201-certified tempered glass.
- IMPORTANT: Measurements of the shower opening must be done AFTER the walls are finished. This includes back walls, tiles, etc.
NanoShield™ Glass Coating
NanoShield™ glass coating is unique because it is
factory-applied and coated onto the glass of the shower door. It is designed
to work at the micro level, eliminating the buildup of mildew, soap scum, and
hard water by effectively repelling water from the glass surface for a
cleaner and clearer appearance. Doors with NanoShield™ takes advantage of a
clear, non-stick, and super-smooth glass protective coat that requires 90%
less cleaning than untreated doors – perfect for your bathroom. From there,
you can count on shower doors that last longer and look cleaner than the
competitors.
SmartClose™
SmartClose™ is the latest technology to hit the market when it comes to shower doors. Designed to make it easier to close glass shower doors while improving their water-tightness, SmartClose™ is a must have for any modern bathroom and shower. When the door reaches a certain angle, the door will close itself, similar to self-closing kitchen drawers and cabinets. There are mechanisms within the hinges that push the door closed on its own, which pave the way for smooth door closures, less water leaks, and a luxurious bathroom experience.
SmartPlumb™
SmartPlumb™ is a specific type of hardware designed to account for out-of-plumb and uneven walls. Implemented by utilizing the U-channel or wall profile, this technology makes it easier to install shower doors on uneven walls, which is quite a common occurrence when remodeling a bathroom. Not only does it make it possible to install shower doors on uneven walls, but it ensures a door-to-wall plumb finish for easy opening and closing.
HydroLock™
Hydro-Lock™ is a unique type of edge-sealing solution in the form of premium-quality vinyl seals which are used on the edges of shower doors and shower door frames to divert water and keep all moisture inside of the shower stall itself. The purpose of Hydro-Lock™ is to prevent all unwanted moisture from seeping out of the shower stall when in use. With a high quality and durable construction, using our Hydro-Lock technology will never leave you worrying about added moisture.
MagnaSeal™
Magna-Seal™ is the ultimate water-tight solution for all shower stalls with shower doors. Made with simple magnetic technology, Magna-Seal™ works to essentially seal the shower door shut, holding it tightly in place when closed to prevent water leakage when the water is running. The purpose of this technology is to ensure a closed door is secure and safe, while also ensuring that the floor outside of the shower stall remains dry and water-free.
SmartWidth™
SmartWidth™ Adjustment is an installation
solution designed to ease the installation process with a variety of
fine-tuned adjustments. SmartWidth™ hardware can be adjusted through the parallel in-line panel by releasing
the tension within the hinge and further overlapping the glass panels.
Most sliding doors can also accommodate for
width adjustment by trimming the top-bar/track to ensure a perfect fit.
Additionally, certain hinged or pivot shower door series equipped with
telescopic wall channels or U-channels to provide some width adjustment to
perfect your installation.
Custom
This model is custom manufactured according to your field conditions, configurations and design requirements. Multiple glass and hardware finish options are available.
Reversible
Reversible installation meaning that this door can be set up for left or right-handed use, giving you flexibility when it comes to your bathroom space.
Mullions
Shower door mullions serve as vertical and/or horizontal dividers that enhance the overall look of the shower enclosure. Seawin mullions can be printed to the glass or created using raised aluminum, depending on the environment and taste. Printed mullions can be easier to clean and maintain in highly utilized environments, while raised aluminum mullions provide an elegant, contemporary appearance that seamlessly integrates with various bathroom designs.
Glass Certifications
Tempered glass is a must-have for all shower doors because it is significantly stronger than non-tempered and other types of glass. Making our products a much safer option. Seawin ensures all of our glass is 100% certified ANSI Z97.1.
Limited Lifetime Warranty
All Seawin shower door products come with a Limited Lifetime Warranty. However, some limitations will apply, and these can be found in "Warranty Details" included with your purchase or found at our website.
| Glass Thickness | 1/2 in. (12 mm) and 3/8 in. (10 mm) |
| Product Dimensions | Custom |
| Glass Type | Any |
| Material | Stainless Steel |
| Door Type | Hinged |
| Door Style | Framed |
| Reversable | Yes |
| Out-of-plumb Adjustment | 3/8 in. |
| Installation | Alcove & Corner |
| Width Adjustment | 3/8 in. |
Frequently Asked Questions
A frameless door features no metal framing around the edges of the glass. Leaving you with a beautiful glass door that works to give the feel of a larger space.
A semi-frameless door features metal framing around specific edges of the glass. These designscombine clean edges with a sense of openness and brings them together to provide your bathroom with a truly stunning look.
Please refer to our “Buying Guide” to learn about measurements & dimensions.
A Pivot Shower Door is a door that swings open similar to a Hinged Shower Door, except that Pivot doors must be attached to a stationary glass panel or to the wall profile system. Pivot doors can not be directly mounted to the wall.
A Hinged Shower Door is a door that is directly attached to the wall or stationary glass panel with hinges. This door swings open, much like traditional interior doors. Hinge doors attached to the wall directly require studs behind the finished walls for installation.
A Double Sliding Shower Door, also known as a Bypass Door, is a two-door design that slides along the track in both directions. Both doors can move & be opened.
A Single Sliding Shower Door is a single-door design that slides along the top track in both directions. Only the one door can move, the other is stationary.
Seawin offers a variety of glass thickness and they appear on different models of our doors. Currently, we offer 3/8” (10mm), 5/16” (8mm) &1/4” (6mm) thicknesses.
It is recommended to use a 4”+ Bubble Level on the finished walls & floor to check for out-of-plumb conditions.
The term “reversible” relates to the installation of the door and its hardware. All ofSeawin’s shower doors are reversible – meaning they can be installed in either direction for either left or right-handed use.
Reviews