Fiaza Curve - LED Mirror

Lumens is a measure of brightness.

Watts describes the amount of power needed to drive the LED light.

Kelvins represent light warmth of LED lights. Kelvins range from 1000 the warmest to 6000 representing day light.

The Color Rendering Index is a scale from 0 to 100 percent indicating how accurate a light source is at rendering color. The higher the CRI, the better the color rendering ability. Light sources with a CRI of 85 or better are considered very good at color rendering.

LED mirrors are designed to provide optimal light conditions for the person standing in front of the mirror, to help with grooming and makeup activities. The LED light is a diffuse light that is not intended to be the primary lighting in the room, and the light projects straight forward through the frosted glass, it does not project into the corners of the room.

Our LED mirrors come standard with 3000 Kelvin color LED strips, which we feel provides optimal "warmer" yellowish light more like a standard incandescent light bulb.

Which LED color option you choose is a matter of personal taste. The warmer color temperature helps you to see how you would look under softer lighting conditions.

Our LED mirrors are not dimmable in our standard configuration. However, we offer upgrade options that are available for most of our mirrors.

Our LED mirrors available with and without switches. Our standard is without switches.

Our LED mirrors are configured with wall outlet plugs. However, hard wire option is available.

No, electrical wire and low profile plus are hidden behind the mirror.

Our two-piece LED mirrors have a separate commercial-grade anodized aluminum frame which is attached to the wall separately from the mirror, allowing the electrical connections to be completed before mounting the mirror. This makes for a very easy installation because the frame is open to the house wiring. The mirror then mounts on the frame using brackets that are attached to the back of the mirror. These brackets easily slide onto the aluminum mounting bars that are integrated into the frame. The frame is 1 3/8 inches deep, and the mirror is 3/16inches thick, resulting in a very low-profile installation.

Our LED mirrors are ETL-listed for the U.S. and Canada, conforming to UL Standard 962, certified to CSA Standard C22.2 No. 250.0.
Our LED mirrors have power regulators installed which are connected on one side to your house electric, and on the other side to the LED lighting that is integrated into the mirror frame.
Regulators: Mean Well - UL 8750 - IP67 - Input Voltage 100-240v AC. Output Voltage 12c DC. Protections: Short circuit / over current / over voltage / over temperature.
Our mirrors connect to a standard switched lighting circuit and are not dimmable.

Our mirror electronics are technically able to operate in a range of 0 to 120 degrees Fahrenheit, but we discourage operating the mirrors at the extremes of this range. Our mirrors are not designed to be operated out of doors and they are not waterproof, but they are manufactured to withstand steamy conditions in the bathroom with lifetime moisture-proof backing. Installation should be indoors and not immediately inside a shower/tub area.